List of Matlab Projects on Signals and Systems for Final Year Students with Full Source Code. This article also Contains Signals and Systems Mini Projects using Matlab with Abstracts & Free PDF Downloads.
Signals and Systems Matlab Projects:
- An Overview of Binary Arithmetic Architectures & Their Implementation in DSP Systems
Many branches of the electrical engineering industry involve applications that use digital signal processing. Almost any type of signal that comes in analog form…
- Java Simulations of Embedded Control Systems
This paper introduces a new Open Source Java library suited for the simulation of embedded control systems. The library is based on the ideas and architecture of TrueTime, a toolbox of Matlab devoted to this topic, and allows Java programmers… - Physical Design Methodologies for Low Power and Reliable 3D ICs
As the semiconductor industry struggles to maintain its momentum down the path following the Moore’s Law, three dimensional integrated circuit (3D IC) technology has emerged as a promising solution to achieve higher integration density… - Evaluation and Implementation of Neural Brain Activity Detection Methods for FMRI
Functional Magnetic Resonance Imaging (fMRI) is a neuroimaging technique used to study brain functionality to enhance our understanding of the brain. This technique is based on MRI, a painless, noninvasive image acquisition method without harmful radiation… - Design and Evaluation of a Discrete Wavelet Transform based Multi-Signal Receiver
General purpose receivers of today are designed with a broad bandwidth so that the receiver can accept a wide range of signal frequencies. These receivers usually accept one signal along with an y interference that is included. To increase the signal… - Individual Stress Diagnosis From Skin Conductance Sensor Signals
Human stress has become a serious problem affecting people’s life. The current state of sensor technology allows developing systems measuring physical symptoms reflecting people’s stress level. However, the detection of stressful events using the skin conductance… - Ultrasound Imaging: Signal Acquisition – New Advanced Processing for Biomedical and Industrial Applications
Use of ultrasound, namely in the biomedical diagnosis and industrial fields, pioneered in 1950s, is today particularly widespread. In the last decades, ultrasound imaging has benefited from advances in numerical technologies such as signal processing… - Channel estimation in Mobile Wireless Systems
The demands of multimedia services from mobile user equipment (UE) for achieving high data rate, high capacity and reliable communication in modern mobile wireless systems are continually ever-growing. As a consequence, several technologies… - MATLAB/Simulink Implementation and Analysis of Three Pulse-Width-Modulation (PWM) Techniques
With advances in solid-state power electronic devices and microprocessors, various pulse-width-modulation (PWM) techniques have been developed for industrial applications. For example, PWM-based three-phase voltage source inverters (VSI) convert DC power to AC… - Detection of Breathing and Infant Sleep Apnea
Sleep apnea is a condition where people pause while breathing in their sleep; this can be of great concern for infants and prematurebabies. Current monitoring systems either require physical attachment to a user or may be unreliable. This project is meant… - Mild Hybrid System in Combination with Waste Heat Recovery for Commercial Vehicles
Performance of two different waste heat recovery systems (one based on Rankine cycle and the other one using thermoelectricity) combined with non-hybrid, mild-hybrid and full hybrid systems are investigated. The vehicle under investigation was a 440 hp… - LiUMIMO: A MIMO Testbed for Broadband Software Defined Radio
In order to keep up with the increasing demand on speed and reliability in modern wireless systems, new standards have to be introduced. By using Multiple Input Multiple Output technology (MIMO) and Orthogonal Frequency Division Multiplexing… - GPS-based Attitude Determination
Inertial sensors and magnetometers are often used for attitude determination of moving platforms. This thesis treats an alternative method; GPS-based attitude determination. By using several GPS-antennas, and with carrier phase measurements determining… - Design of Pipelined Analog-to-Digital Converter with SI Technique in 65 nm CMOS Technology
Analog-to-digital converter (ADC) plays an important role in mixed signal processing systems. It serves as an interface between analog and digital signal processing systems. In the last two decades, circuits implemented in current-mode technique… - Thermal Simulation of Hybrid Drive System
Safety, performance and driving comforts are given high importance while developing modern day cars. All-Wheel Drive vehicles are exactly designed to fulfill such requirements. In modern times, human concern towards depleting fossil fuels and cognizance… - Aspects Of The Choice Of Sampling Frequency In The Control System Of A Gas Turbine
At Siemens, PLCs are used to control the gas turbines, and to execute the code in the plcs cyclic interrupts are used. If the execution time for the interrupt becomes close to the cyclic time of the interrupt the load of the PLC increases… - Simulation of a CDMA System Based on Optical Orthogonal Codes
To take advantage of the high speed in an optic fiber, one of the basic concept in fiber optic communication is to allow several users to simultaneously transmit data over the channel. One technique that provides multiple access is it fiber optic-code… - Rapid Prototyping: Development and Evaluation of Field Oriented Control using LabView FPGA
This report describes the work of developing a rapid prototyping system for Permanent Magnet Synchronous Motors using LabView FPGA at ABB Corporate Research in Västerås. The aim of the rapid prototyping system is to serve as an additional tool to simulation… - Enhanced Learning–Combining MATLAB Simulation with Telecommunication Instructional Modeling (TIMS™) in a Senior Level Communication Systems Course
In this paper we present the successes of combining MATLAB™ simulation methods with the Telecommunication Instructional Modeling System (EMONA-IMS™) to provide experiential learning in our senior level wireless communication systems… - Outlier Detection for Sensor Systems (ODSS): A MATLAB Macro for Evaluating Microphone Sensor Data Quality
Microphone sensor systems provide information that may be used for a variety of applications. Such systems generate large amounts of data. One concern is with microphone failure and unusual values that may be generated as part of the information collection process… - MATLAB Based DC Motor Control Lab
The DC servo motor has applications in automotive market in applications ranging from heating and ventilation to power mirror positioning. It is also in use in Industrial and Consumer Markets for entertainment equipment, HVAC ventilation control… - Detection of Breathing and Infant Sleep Apnea
Sleep apnea is a condition where people pause while breathing in their sleep; this can be of great concern for infants and premature babies. Current monitoring systems either require physical attachment to a user or may be unreliable… - IR-Depth Face Detection and Lip Localization Using Kinect V2
Face recognition and lip localization are two main building blocks in the development of audio visual automatic speech recognition systems (AV-ASR). In many earlier works, face recognition and lip localization were conducted in uniform lighting… - Performance Analysis of Conjugate Gradient Algorithms Applied to the Neuro-fuzzy Feedback Linearization-based Adaptive Control Paradigm for Multiple Hvdc Links in AC/DC Power System
The existing literature predominantly concentrates on the utilization of the gradient descent algorithm for control systems design in power systems for stability enhancement. In this paper, various flavors of the Conjugate Gradient (CG) algorithm… - Low-Resolution ADC Receiver Design, MIMO Interference Cancellation Prototyping, and PHY Secrecy Analysis
This dissertation studies three independent research topics in the general field of wireless communications.The first topic focuses on new receiver design with low-resolution analog-to-digital converters (ADC). In future massive multiple-input-multiple-output… - Software-Defined Networking enabled Resource Management and Security Provisioning in 5G Heterogeneous Networks
Due to the explosive growth of mobile data traffic and the shortage of spectral resources, 5G networks are envisioned to have a densified heterogeneous network (HetNet) architecture, combining multiple radio access technologies (multi-RATs) into a single holistic network… - Investigation of Dynamic Information in Reactor Noise Measurements
The aim of this master´s thesis is to investigate if it is possible to extract more dynamic information out of physical signals from nuclear reactor noise measurements than what is possible today. This was achieved by investigating… - Neuro-Fuzzy Wavelet based Adaptive MPPT Algorithm for Photovoltaic Systems
An intelligent control of photovoltaics is necessary to ensure fast response and high efficiency under different weather conditions. This is often arduous to accomplish using traditional linear controllers, as photovoltaic systems are nonlinear… - Virtual Inertia Control-based Model Predictive Control for Microgrid Frequency Stabilization Considering High Renewable Energy Integration
Renewable energy sources (RESs), such as wind and solar generations, equip inverters to connect to the microgrids. These inverters do not have any rotating mass, thus lowering the overall system inertia. This low system inertia issue could affect… - Performance Analysis of Conjugate Gradient Algorithms Applied to the Neuro-Fuzzy Feedback Linearization-based Adaptive Control Paradigm for Multiple HVDC Links in AC/DC Power System
The existing literature predominantly concentrates on the utilization of the gradient descent algorithm for control systems design in power systems for stability enhancement. In this paper, various flavors of the Conjugate Gradient (CG) algorithm have been employed… - Acceleration Slip Regulation Strategy for Distributed Drive Electric Vehicles with Independent Front Axle Drive Motors
This paper presents an acceleration slip regulation strategy for distributed drive electric vehicles with two motors on the front axle. The tasks of the strategy include controlling the slip ratio to make full use of the road grip and controlling the yaw rate… - FILOSE for Svenning: A Flow Sensing Bioinspired Robot
The trend of biomimetic underwater robots has emerged as a search for an alternative to traditional propeller-driven underwater vehicles. The drive of this trend, as in any other areas of bioinspired and biomimetic robotics, is the belief that exploiting… - Modelling an RF Converter in Matlab
Radar warning systems are life saving equipment in modern fighter aircraft. It is therefore vital that the system can tell the difference between a threat (genuine frequency) and a false signal (spurious frequency). This study presents a model aimed at predicting… - Multicore, Multithreaded, Phase-synchronous Fm Sound Synthesizer
This project implements a phase-synchronous FM synthesis algorithm in hardware. Envelope and low frequency oscillator modulation of oscillator parameters is implemented. The microcontroller the system is based on, the XMOS XS1-G4, allows for physical parallelism… - Scaled Synthetic Aperture Radar System Development
Synthetic Aperture Radar (SAR) systems generate two dimensional images of a target area using RF energy as opposed to light waves used by cameras. When cloud cover or other optical obstructions prevent camera imaging over a target area, SAR can be substituted… - Methods for Calibration of the Vibration Measurement System EVME Used on the JAS 39 Gripen Engine
This project investigates methods for calibrating and functional testing an Engine Vibration Measurement Equipment. The equipment uses accelerometers to measure vibrations on the JAS 39 Gripen aircraft engine to ensure that the engine is correctly installed… - Radar Target Modelling Based on RCS Measurements
When simulating target seekers, there is a great need for computationally efficient, target models. This report considers a study of radar target modelling based on Inverse Synthetic Aperture Radar (ISAR) measurements of generic aircraft… - Development of a Voice Conversion System
Voice Conversion is a technique which can be used to convert or change the speech uttered by a source speaker in such a manner that it is heard as if spoken by another target speaker. Here, an approach for static voice conversion is developed and implemented… - Yaw Control using Rear Wheel Steering
The purpose of this project is to continue the work on a vehicle model developed in ADAMS/Car and applied with the concept of ACM (Autonomous Corner Module). The project is divided up in two parts. The objective of the first part is to setup a co-simulation… - Decentralized Nonlinear Control for Power Systems using Normal Forms and Detailed Models
This paper proposes a decentralized method for nonlinear control of oscillatory dynamics in power systems. The method is applicable for ensuring both transient stability as well as small-signal stability. The method uses an optimal control… - Towards Optimization of Metaheuristic Algorithms for IoT Enabled Smart Homes Targeting Balanced Demand and Supply of Energy
Internet of Things (IoT) enabled Smart grid (SG) is one of the most advanced technologies, which plays a key role in maintaining a balance between demand and supply by implementing demand response (DR) program. In SG, the main focus of the researchers… - Secrecy Capacity Analysis Over κ – μ Fading Channels: Theory and Applications
In this paper, we consider the transmission of confidential information over a κ–μ fading channel in the presence of an eavesdropper who also experiences κ–μ fading. In particular, we obtain novel analytical solutions for the probability of strictly… - Novel Three Phase Multi-Level Inverter Topology with Symmetrical DC-Voltage Sources
A novel three phase modular multilevel inverter (MMLI) is proposed. The proposed inverter consists of primary cell and repetitive modular cells which are connected in series arrangement with the primary cell. Therefore, the proposed topology… - A Three Phase Hybrid Cascaded Modular Multilevel Inverter for Renewable Energy Environment
A three phase hybrid cascaded modular multilevel inverter topology which is derived from a proposed modified H-bridge (MHB) module. This topology results in the reduction of number of power switches, losses, installation area, voltage stress and converter cost… - A Multi – Layer Parametric Approach to Maximize the Access Probability of Mobile Networks
Next-generation mobile networks (5G) are defined to provide access in the framework of heterogeneous systems where it is crucial to have ‘‘always on’’ and ‘‘everywhere connectivity’’ capabilities. This is of fundamental importance… - Design and Real-Time Controller Implementation for a Battery-Ultra-capacitor Hybrid Energy Storage System
Two real-time energy management strategies have been investigated for optimal current split between batteries and ultra capacitors (UCs) in electric vehicle (EV) applications. In the first strategy, an optimization problem is formulated… - Fuzzy Adaptive Repetitive Control for Periodic Disturbance with Its Application to High Performance Permanent Magnet Synchronous Motor Speed Servo Systems
For reducing the steady state speed ripple, especially in high performance speed servo system applications, the steady state precision is more and more important for real servo systems. This paper investigates the steady state speed ripple periodic… - Burst Error Correcting Convolutional Codes for Broadband Wireless Transmission Systems
This thesis presents high performance forward error correcting codes suitable for random and burst errors. It initially verifies the performance of burst error correcting convolutional codes. Then constructed codes are combined with other high… - Application of Model Predictive Control to BESS for Microgrid Control
Battery energy storage systems (BESSs) have been widely used for micro-grid control. Generally, BESS control systems are based on proportional-integral (PI) control techniques with the outer and inner control loops based on PI regulators… - Compressive Sensing Analog Front End Design In 180 nm CMOS Technology
In order to accurately reconstruct signal waveform a signal must be sampled at least twice as fast as the bandwidth of the signal. Ultra Wideband (UWB) signals have extraordinary potential for high information transmission while a central focus of wireless… - Modeling the SPS Feedback and Feedforward Systems for Improved Performance
The Super Proton Synchrotron (SPS) is the last link in the chain of accelerators providing protons to the Large Hadron Collider (LHC). The SPS is currently the limiting factor on the maximum number of protons and thus collisions in the LHC. The SPS upgrade is under way… - Design and Evaluation of a Discrete Wavelet Transform based Multi-Signal Receiver
General purpose receivers of today are designed with a broad bandwidth so that the receiver can accept a wide range of signal frequencies. These receivers usually accept one signal along with any interference that is included. To increase the signal detection… - Using Matlab Tools for Simulation of the Optical Transmission Medium
The paper presents a design and simulation of the optical path which include linear and nonlinear effects using the MATLAB simulation tools. The program includes a calculation part of nonlinear effects and a simulation part where the signal is examined… - MATLAB Simulink Simulation Platform for Photonic Transmission Systems
High speed and ultra-high capacity optical communications have emerged as the essential techniques for backbone global information transmission networks. As the bit rate of the transmission system gets higher and higher 40 Gb/s to 100 Gb/s the modeling… - Synthetic Aperture Radar Imaging Simulated in MATLAB
This thesis further develops a method from ongoing thesis projects with the goal of generating images using synthetic aperture radar (SAR) simulations coded in MATLAB. The project is supervised by Dr. John Saghri and sponsored by Raytheon Space and Airborne Systems… - MATLAB/Simulink Implementation and Analysis of Three Pulse-Width-Modulation (PWM) Techniques
With advances in solid-state power electronic devices and microprocessors, various pulse-width-modulation (PWM) techniques have been developed for industrial applications. For example, PWM-based three-phase voltage source inverters (VSI) convert DC power… - Java Simulations of Embedded Control Systems
This paper introduces a new Open Source Java library suited for the simulation of embedded control systems. The library is based on the ideas and architecture of TrueTime, a toolbox of Matlab devoted to this topic, and allows Java programmers to simulate… - An Overview of Binary Arithmetic Architectures & Their Implementation in DSP Systems
Many branches of the electrical engineering industry involve applications that use digital signal processing. Almost any type of signal that comes in analog form, such as sound, video, and radio or microwaves, must use digital signal processing for implementation… - Neuro-Fuzzy Wavelet based Adaptive Mppt Algorithm for Photovoltaic Systems
An intelligent control of photovoltaics is necessary to ensure fast response and high efficiency under different weather conditions. This is often arduous to accomplish using traditional linear controllers, as photovoltaic systems are nonlinear and contain… - Research on the use of Matlab in the Modeling of 3-phase Power Systems
This paper describes the modeling and simulation library for power systems si1mulation under SIMULINK environment. The different features of MATLAB Toolboxes used in the analysis of power systems are described. Software introduces SIMULINK environment… - De-Noising Audio Signals Using MATLAB Wavelets Toolbox
Based on the fact that noise and distortion are the main factors that limit the capacity of data transmission in telecommunications and that they also affect the accuracy of the results in the signal measurement systems, whereas, modeling and removing noise… - Software Tools and Simulators in the Education of Engineering of Telecommunications
The use of software tools and simulators in the education field has a growing interest in most of universities and educational procedures. Nowadays, in university education new technologies are used to improve and complement the theoretical concepts… - Speech Recognition Using Correlation Technique
The Development in Wireless and communication and mobile devices has bolstered the improvement of speech recognition system. When we say speech recognition system two main significant terms that comes are the pattern matching and the feature extraction… - Direct Detection in Optical Communication Using Intensity Modulation
Optical wireless communication (OWC) refers to communication through an unguided medium using modulated light. In this paper, the performance of OWC systems employing intensity modulation and direct detection (IM-DD), established by modulating light… - The Laser Satellites Communications and Laser Noises
The gain of advanced optical communication systems is reduced by the noise of optical source. Coherent optical communication systems are in particular very sensitive to the noise transmitter and local laser. Optical space communications… - A Minimally Invasive 64-Channel Wireless μECoG Implant
Emerging applications in brain–machine interface systems require high-resolution, chronic multisite cortical recordings, which cannot be obtained with existing technologies due to high power consumption, high invasiveness, or inability to transmit… - Mobility in Wireless Sensor Networks
The combination of mobility with wireless networks greatly expands the application space of both robots and distributed sensor networks; such a pervasive system can enable seamless integration between the digital and physical worlds… - Low Power System Design for Emerging Pervasive Platform
Personal computing devices have gone through more than four decades of evolution. The form factor of computing devices has gone down dramatically, while computation workload for each computing device has increased significantly… - LiUMIMO: A MIMO Testbed for Broadband Software Defined Radio
In order to keep up with the increasing demand on speed and reliability in modern wireless systems, new standards have to be introduced. By using Multiple Input Multiple Output technology (MIMO) and Orthogonal Frequency Division Multiplexing (OFDM)… - Fast Change Point Detection for Electricity Market Analysis
Electricity is a vital part of our daily life; therefore it is important to avoid irregularities such as the California Electricity Crisis of 2000 and 2001. In this work, we seek to predict anomalies using advanced machine learning algorithms… - Mining Requirements from Closed-Loop Control Models
Formal verification of a control system can be performed by checking if a model of its dynamical behavior conforms to temporal requirements. Unfortunately, adoption of formal verification in an industrial setting is a formidable challenge as design… - A pattern recognition method for electronic noses based on an olfactory neural network
Artificial neural networks (ANNs) are generally considered as the most promising pattern recognition method to process the signals from a chemical sensor array of electronic noses, which makes the system more bionics. This paper presents a chaotic neural… - Performance Assessment of a Custom, Portable, and Low-Cost Brain-Computer Interface Platform
Conventional brain-computer interfaces (BCIs) are often expensive, complex to operate, and lack portability, which confines their use to laboratory settings. Portable, inexpensive BCIs can mitigate these problems, but it remains unclear whether their… - Investigating the use of wing sweep for pitch control of a small unmanned air vehicle
Small Unmanned Air Vehicles (UAVs) are versatile tools with both civilian and military applications. Fixed wing UAVs require forward airspeed to remain air borne, usually resulting in constant energy expenditure to loiter over targets… - Detection of Breathing and Infant Sleep Apnea
Sleep apnea is a condition where people pause while breathing in their sleep; this can be of great concern for infants and premature babies. Current monitoring systems either require physical attachment to a user or may be unreliable. This project… - Grid Synchronization of a Seven-Phase Wind Electric Generator using d-q PLL
The evolving multiphase induction generators (MPIGs) with more than three phases are receiving prominence in high power generation systems. This paper aims at the development of a comprehensive model of the wind turbine driven seven-phase induction generator… - Subwoofer Frequency Response Optimization by Means of Active Control
Most subwoofer systems have difficulties producing frequencies in the low end of the hearing spectrum due to the added power requirements and instabilities. Active controls can transform the audio signal without changing physical characteristics and ultimately… - Demand Response-Enabled Model Predictive HVAC Load Control in Buildings using Real-Time Electricity Pricing
A practical cost and energy efficient model predictive control (MPC) strategy is proposed for HVAC load control under dynamic realtime electricity pricing. The MPC strategy is built based on a proposed model that jointly minimizes the total energy consumption and hence… - Autonomous Brain-Controlled Functional Electrical Stimulation for Grasp and Release in Complete Cervical Spinal Cord Injury
There are over 33,000 people in the United States living with complete tetraplegia due to traumatic spinal cord injury (SCI). These individuals rely heavily on family and caregivers as they are unable to perform many activities of daily living… - Swept-Tone Evoked Otoacoustic Emissions: Stimulus Calibration and Equalization
Otoacoustic Emissions (OAE) are minute acoustic responses originating from the cochlea as a result of an external acoustic stimulus and are recorded using a sensitive microphone placed in the ear canal. OAEs are acquired by synchronous stimulation… - Acquisition of Otoacoustic Emissions Using Swept-Tone Techniques
Otoacoustic emissions (OAEs) have been under investigation since their discovery 30 years ago (Kemp, 1978). Otoacoustic emissions are quiet sounds generated within the cochlea that can be detected with a sensitive microphone placed within the ear canal… - Controlling a Robot Hand in Simulation and Reality
This master thesis was made at the Institute of Technology Stockholm and is a part of a robot hand project called 10-X with the aim to develop a low-cost robot hand that is light and strong. The project specification is to further improve the ability… - Development of Automated Agricultural Process Monitoring and Control Technology in an Enclosed System
For proper growth of any plants various physiological and physiochemical factors are responsible like: soil moisture, atmospheric temperature, humidity, sunlight, pH of soil, nutrient and chemical balance of soil. Biologically, these parameters… - Intelligent Traffic Light Control Using Image Processing
In India, with the growing number of vehicles, traffic congestion at junctions has become a serious issue. The density of vehicles is increasing day by day and there is an urgent need of adaptive traffic signals which can do real time monitoring… - Power Load Balancing Using Fuzzy Logic
Overloading is a major problem as there is no any system to ensure the consumer power usage. For example, weather conditions can change the consumer usage and extreme weather conditions can cause overloading. So when there is no way to determine consumer… - Fall Classification Using Neural Network
Automated fall detection provides important information to doctors in treating their patients. This information is particularly important in children with cerebral palsy as they are more vulnerable to falling. Shriners Hospitals for Children–Northern…
More >> Matlab based Projects for Electronics and Communication Engineering Students
More >> Matlab Projects on Signals and Systems