List of 60+ Innovative Biomedical Project Topics based on Embedded Systems, Micro controller, MATLAB and Labview with Free Downloads:
- Introducing an e-Health Card for Developing Countries
Health care system is one of the important sectors in any country for its national interest. Bangladesh is one of the over… - Embedded Internet for Pulse Oximeters
In recent years there has been many investigations into sleeping disorders. Many studies are carried out in specially equipped units in which a patient is monitored whilst sleeping. Measurements that are taken are in the form of…
Final Year Project Ideas for Biomedical Engineering
- Microcontroller Based Heart Rate Monitor
This paper describes the development of a heart rate monitor system based on a microcontroller. It offers the advantage of portability over tape-based recording systems. The paper explains how a single-chip microcontroller can be used to… - Microcontroller based Wireless Temperature and Heart Beat Read-out
In this paper, we propose a Simple Wireless transmission System using common approach Sensor Platform called The wireless based Patient Sensor platform (WSP, Sensor Node) which has remote access capability. The goals of the WSP are to… - Supporting Human–Robot Interaction Based on the Level of Visual Focus of Attention
We propose a human-robot interaction approach for social robots that attracts and controls the attention of a target person depending on her/his current visual focus of attention. The system detects the person’s current task (attention) and… - Comparative Study of Biological Neural Networks and Artificial Neural Networks
In this research project, the features of biological and artificial neural networks were studied by reviewing the existing works of authorities in print and electronics on biological and artificial neural networks. The features were then… - No Doze EEG Sleep Detector
An appreciable difference exists between brainwaves of a person that is awake and a person that is on the verge of sleep. As a person transitions from alertness to sleep in frequency, diminish in amplitude, and become more irregular in frequency… - Architecture for Smart Sensors System for Tele-health
This paper proposes an architecture for a smart sensors system (SSS) that can be used by home care staff, nurses and physicians to identify the patients who need an immediate or urgent attention. The system is focused primarily… - Detection of Cancer in Human Blood Sample based on Microscopic Images
At the moment, identification of blood disorders is through visual inspection of microscopic images of blood cells. From the identification of blood disorders, it can lead to classification of certain diseases related to blood. This paper… - Modeling of the arterial system with an AVD implanted
The number of patients that are waiting for heart transplants far exceed the number of available donor hearts. Left Ventricular Assist Devices are mechanical alternatives that can help and are helping several patients. They work by… - A Neural Network Based Brain-Computer Interface for Classification of Movement Related EEG
A brain-computer interface, BCI, is a technical system that allows a person to control the external world without relying on muscle activity. This project presents an EEG based BCI designed for automatic classification of A brain-computer… - A Single-Pixel Wireless Contact Lens Display
We present the design, construction, and in vivo rabbit testing of a wirelessly powered contact lens display. The display consists of an antenna, a 500 x 500 μm2 silicon power harvesting and radio integrated circuit, metal interconnects… - Strategic Placing of Field Hospitals Using Spatial Analysis
Humanitarian help organisations today may benefit on improving their location analysis when placing field hospitals in countries hit by a disasters or catastrophe. The main objective of this study is to develop and evaluate a spatial… - 3D EM/MPM Medical Image Segmentation Using an FPGA Embedded Design Implementation
This project presents a Field Programmable Gate Array (FPGA) based embedded system which is used to achieve high speed segmentation of 3D images. Segmentation is performed using Expectation-Maximization with Maximization of Posterior… - Wireless ECG
This document contains the development of an amplifier for an ECG-signal and interfacing it to wireless communication. The purpose of this project is to get a clear ECG-signal without any noise, save it and send it through wireless communication… - Rhetorical Structures in Medication Information for Patients and Physicians
The healthcare domain contains a lot of information that could help patients understand and handle their situation, if it is presented in an understandable way. One way to assist healthcare professionals in this endeavour could be a text… - Real-Time Simulation of Passage-of-Time Encoding in Cerebellum Using a Scalable FPGA-Based System
The cerebellum plays a critical role for sensorimotor control and learning. However, dysmetria or delays in movements’ onsets consequent to damages in cerebellum cannot be cured completely at the moment. Neuroprosthesis is an emerging technology… - A Prototype for Blood Typing Based on Image Processing
This paper presents a new methodology for blood phenotyping based on the plate test and on image processing techniques to determine the occurrence of agglutination (between blood sample and reagent). A portable device for ABO-Rh blood typing… - A Smart Gateway Design for WSN Health Care System
Using Wireless Sensor Networks (WSNs) in health care system has yielded a tremendous effort in recent years. However, in most of these researches tasks like sensor data processing, health states decision making and emergency messages sending are… - Development of an API for Creating and Editing openEHR Archetypes
Archetypes are used to standardize a way of creating, presenting and distributing health care data. In this master thesis project the open specifications of openEHR was followed. The objective of this project has been to develop a Java based… - An Android based Monitoring and Alarm System for Patients with Chronic Obtrusive Disease
Consistent monitoring of vital health parameters is an important issue in the medical industry. With recent technologies we are able to carry out remote monitoring of physiological parameters in patients. This allows communication between a… - A Novel Airflow Control Valve for use in Medical Applications
Rapid improvements in digital technology over the last two decades have led to artificial ventilators that drastically improve physicians’ ability to measure and control aspects of their patients’ breathing. However, the mechanical systems… - White Blood Cell Segmentation in Microscopic Blood Images Using Digital Image Processing
Evaluation of blood smear is a commonly clinical test these days. Most of the time, the hematologists are interested on white blood cells (WBCs) only. Digital image processing techniques can help them in their analysis and diagnosis. For example… - Development of Optimal Photosensors Based Heart Pulse Detector
The development of heart pulse instruments rapidly fast in market since 21st century. However, the heart pulse detector is expensive due to the complicated system and it is used widely only in hospitals and clinics. The project is targeting to… - Design and Development of a Heart Rate Measuring Device using Fingertip
In this paper, we presented the design and development of a new integrated device for measuring heart rate using fingertip to improve estimating the heart rate. As heart related diseases are increasing day by day, the need for an accurate and… - Performance Study on ZigBee-Based Wireless Personal Area Networks for Real-Time Health Monitoring
When multiple ZigBee wireless personal area networks (WPANs) are in close proximity to each other, contentions and collisions in transmissions will lead to increased packet delays. However, there is no existing study on how delay performance would… - An Adaptive Eye Gaze Tracking System Without Calibration for Use in an Automobile
One of the biggest hurdles to the development of an effective driver state monitor is the that there is no real-time eye-gaze detection. This is primarily due to the fact that such systems require calibration. In this thesis the various aspects… - Compensating for Respiratory Artifacts in Blood Pressure Waveforms
Cardiac catheterization has for a long time been a valuable way to evaluate the hemodynamics of a patient. One of the benefits is that the entire blood pressure waveform can be recorded and visualized to the cardiologist. These measurements… - Signaling Pathways Involved in Mechanical Stimulation and ECM Geometry in Bone Cell
The proliferation and differentiation of osteoblasts are influenced by mechanical and geometrical growth environments. A specific aim of this thesis was the elucidation of signaling pathways involved in mechanical stimulation and geometric… - The Role of DAP-Kinase in Modulating Vascular Endothelial Cell Function Under Fluid Shear Stress
Atherosclerosis preferentially develops in vascular regions of low or disturbed flow and high spatial gradients. Endothelial cells that line the vessel walls actively participate in translating mechanical stimuli, shear stress due to fluid flow… - Preparation and Evaluation of Antibacterial Dental Glass-ionomer Cements
The functional quaternary ammonium salts (QAS) and their constructed polyQAS or PQAS were synthesized, characterized and formulated into a novel antibacterial glass-ionomer cement. Compressive strength (CS) and Streptococcus mutans… - Design of a Galvanotaxic Track for Cells, using Polymer Electrodes
Galvanotaxis is the movement of cells in an applied electric field. The first steps to design a chip for observations of galvanotaxic behavior of cells were done in this work. The chip is a miniaturised system of previous larger galvanotaxis… - CCASENSE: Canonical Correlation Analysis for Estimation of Sensitivity Maps for Fast MRI
Magnetic Resonance Imaging is an established technology for both imaging and functional studies in clinical and research environments. The field is still very research intense. Two major research areas are acquisition time and signal quality… - Adipose tissue segmentation in whole-body MRI
Adipose tissue volume and distribution is related to metabolic diseases such as diabetes and atherosclerosis. This relationship is in focus for much research, much due to a worldwide increase in obesity. It is in many cases of interest… - Implementing a visualization tool for Myocardial Strain Tensors
The heart is a complex three-dimensional structure with mechanical properties that are inhomogeneous, non-linear, time-variant and anisotropic. These properties affect major physiological factors within the heart, such as the pumping… - Segmentation of the Brain from MR Images
KTH, Division of Neuronic Engineering, have a finite element model of the head. However, this model does not contain detailed modeling of the brain. This project consists of finding a method to extract brain tissues from T1-weighted MR images of the head… - A method for Identification of Putatively Co-regulated Genes
The genomes of several organisms have been sequenced and the need for methods to analyse the data is growing. In this project a method is described that tries to identify co-regulated genes. The method identifies transcription factor binding sites… - Plaque Identification using Automated Image Enhancement
Image enhancement is a task of applying certain transformations to an original image for obtaining output image visually more pleasant, more detailed, or less noisy. The transformation usually requires interpretation and feedback from a human… - Control and Modeling of Plant Growth: A Versatile System for Mineral Nutrient Addition and Feed-back Monitoring
Studying plants under controlled environmental conditions is a key component of current research. This thesis concentrates on the study of plant growth under nutrient-limiting conditions. The first objective is the design and construction… - A Prototype for Blood Typing Based on Image Processing
This paper presents a new methodology for blood phenotyping based on the plate test and on image processing techniques to determine the occurrence of agglutination (between blood sample and reagent). A portable device for ABO-Rh blood… - Simulation Driven Pre-operative Planning for the Treatment of Hallux Rigidus
The present study utilizes finite element analysis in order to simulate a surgical operation in the treatment of a hallux rigidus case, as designed and developed by Episurf Medical AB (Stockholm, Sweden). The surgical intervention includes… - Development of Database Support for Production of Doubled Haploids
In this project relational and Lotus Notes database technology are evaluated with regard to their suitability in providing computer-based support in plant breeding in general and specifically in the production of doubled haploids… - Scalable and QoS Networking Solutions for Telemedicine
Retrieving data from a patient in real-time is a challenging operation, especially when requiring information from the network to support the patient’s health. A real-time healthcare system process is conducted with a continual input, processing… - 101 Independent Projects for Applied Microbiology
In the project “101” Independent Projects for Applied Microbiology, 5 specific components have been developed. Each component is responsive to problems which have been observed in the previous individual research work… - Biometric Fingerprint Identification
Identification of individuals is a very basic societal requirement. Electronic verification of a person’s identity is of great importance as more interactions take place electronically. Biometric fingerprint identification is a technique… - Using Nuclear Receptor Interactions as Biomarkers for Metabolic Syndrome
Metabolic syndrome is taking epidemic proportions, especially in developed countries. Each risk factor component of the syndrome independently increases the risk of developing coronary artery disease. The risk factors are obesity, dyslipidemia… - A New Approach for Human Identification Using the Eye
The vein structure in the sclera, the white and opaque outer protective covering of the eye, is anecdotally stable over time and unique to each person. As a result, it is well suited for use as a biometric for human identification… - Nutrient Driven Topology Optimization
The aim of this study is to investigate how a biological structure changes its shape and boundary under different cases of load if flow of nutrients is included, since nutrient flow has not been taken into account in previous studies… - FILOSE for Svenning: A Flow Sensing Bioinspired Robot
The trend of biomimetic underwater robots has emerged as a search for an alternative to traditional propeller-driven underwater vehicles. The drive of this trend, as in any other areas of bioinspired and biomimetic robotics… - Quaternionic Attitude Estimation for Robotic and Human Motion Tracking
In recent years, wireless positioning and tracking devices based on semiconductor micro electro-mechanical system (MEMS) sensors have successfully integrated into the consumer electronics market. Information from the sensors is processed… - Architecture for Smart Sensors System for Tele-health
This paper proposes an architecture for a smart sensors system (SSS) that can be used by home care staff, nurses and physicians to identify the patients who need an immediate or urgent attention. The system is focused primarily towards… - The effect of normalization methods on the identification of differentially expressed genes in microarray data
In this study the effect of normalization methods on the identification of differentially expressed genes is investigated. A zebrafish microarray dataset called Swirl was used in this thesis work. First the Swirl dataset was extracted… - Biomechanics of the Intervertebral Disc: The Effects of Load History on Mechanical Behavior
Degenerative disc disease is associated with back pain, and can be a debilitating disorder. In addition to the biological contributions of genetics and aging, mechanical factors have been implicated in accelerating the progression… - Semi-Automatic Translation of Medical Terms from English to Swedish: SNOMED CT in Translation
The Swedish National Board of Health and Welfare has been overseeing translations of the international clinical terminology SNOMED CT from English to Swedish. This study was performed to find whether semi-automatic methods of translation… - Robotic Automated External Defibrillator Ambulance for Emergency Medical Service in Smart Cities
Smart cities essentially require the state-of-the-art technologies that can provide smart service in various aspects, and robotic systems are one of the key solutions for such requirements. Time is a critical issue when dealing with people… - Ultrasound Imaging: Signal Acquisition – New Advanced Processing for Biomedical and Industrial Applications
Use of ultrasound, namely in the biomedical diagnosis and industrial fields, pioneered in 1950s, is today particularly widespread. In the last decades, ultrasound imaging has benefited from advances in numerical technologies… - A Single-Pixel Wireless Contact Lens Display
We present the design, construction, and in vivo rabbit testing of a wirelessly powered contact lens display. The display consists of an antenna, a 500 x 500 μm2 silicon power harvesting and radio integrated circuit, metal interconnects… - A Novel Liquid Antenna for Wearable Bio-monitoring Applications
The performance of the most commonly used metal antennas close to the human body is one of the limiting factors of the performance of bio-sensors and wireless body area networks (WBAN). Due to the high dielectric and conductivity contrast…
>> Simple Biomedical Projects Ideas for Engineering Students
>> Latest Biomedical Projects, Project Abstracts and Downloads with Full Reports
>> Biomedical Projects based on Electronics Topics for B.E/B.Tech Students