List of 30+ Digital Signal Processing Projects Topics for B.E/B.Tech (ECE, CSE) Students:
- New Approaches to Analyze Sound Barrier Effectiveness
Highway noise can cause annoyance, affect sleep patterns, and reduce the property value for people in the proximity. Current methods for analyzing the effectiveness of sound barriers only take… - Fuzzy Signal Detection in Multiple-access Ultra Wide Band Communication Systems
Ultra-wide band (UWB) communications transmits a wide bandwidth signal with an extremely low power spectral density. This property of UWB makes it possible to co-exist with the current narrowband…
- Efficient and Secure Image and Video Processing and Transmission in Wireless Sensor Networks
Sensor nodes forming a network and using wireless communications are highly useful in a variety of applications including battle field (military) surveillance, building security, medical and… - Direct Torque Control using Space Vector Modulation and Dynamic Performance of the Drive, via a Fuzzy Logic Controller for Speed Regulation
During the last decade, a lot of modifications in classic Direct Torque Control scheme have been made. The objective of these modifications was to improve the start up of the motor, the operation… - Improved Speech Communication in a Car
In modern cars a lot of effort is put on reducing the background noise level. Despite these efforts it is often difficult for persons in the rear seat(s) to hear the persons in the front seat… - Ultrasound Imaging: Signal Acquisition – New Advanced Processing for Biomedical and Industrial Applications
Use of ultrasound, namely in the biomedical diagnosis and industrial fields, pioneered in 1950s, is today particularly widespread. In the last decades, ultrasound imaging has benefited from… - Channel Prediction for Moving Relays
In mobile communications, channel side information at transmitters can increase capacity. For moving relays nodes, local nodes placed on buses and trams in urban areas, the channel state information is… - Low Power Shift and Add Multiplier Design
Today every circuit has to face the power consumption issue for both portable device aiming at large battery life and high end circuits avoiding cooling packages and reliability issues that are too… - Gearbox Diagnosis
Diagnosis based on vibration analysis is a method that has many benefits to offer. It is easy to implement the method on existing transmissions by attaching accelerometers outside the gearbox… - Solving Sudoku by Sparse Signal Processing
Sudoku is a discrete constraints satisfaction problem which is modeled as an under determined linear system. This report focuses on applying some new signal processing approaches to solve… - Particle Filtering for Track Before Detect Applications
Integrated tracking and detection, based on unthresholded measurements, also referred to as track before detect (TBD) is a hard nonlinear and non-Gaussian dynamical estimation and detection problem… - Implementation and Evaluation of Content-aware Video Retargeting Techniques
The purpose of this master thesis was to study different content-aware video retargeting techniques, concentrating on a generalization of seam carving for video. Focus have also been put on… - A Novel Approach for High Speed and Low Power 4-Bit Multiplier
A circuit design for a new high speed and Low Power 4-bit Braun Multiplier is presented. The multiplier is implemented by using different power reduction techniques. To design a multiplier it is necessary… - A Real-Time Control System for a Frequency Response-based Permittivity Sensor
Permittivity is an important property of dielectric materials. By measuring the permittivity of a material, it is possible to obtain information about the material’s physical and chemical properties… - Target Tracking using Maxwell’s Equations
Starting from Maxwell’s equations, we derive a sensor model for three-axis magnetometers suitable for localization and tracking applications. The model depends on the relative position between the sensor… - Video Stabilization and Rolling Shutter Correction using Inertial Measurement Sensors
Most mobile video-recording devices of today, e.g. cell phones and music players, make use of a rolling shutter camera. A rolling shutter camera captures video by recording every frame line-by-line… - Evaluation of Multicore Cache Architecture for Radar Signal Processing
Signal processing in advanced radar systems requires high computation performance. Therefore, Multicore processor architectures are of increasing interest for implementation of radar signal processing… - Image Processing Techniques using MATLAB
Image processing is the field of signal processing where both the input and output signals are images. Images can be thought of as two-dimensional signals via a matrix representation, and image… - SIP on an Overlay Network
With the development of mobile (specifically: wide area cellular telephony) technology, users’ requirements have changed from the basic voice service based on circuit switch technology to a desire… - VLSI Design of Low Power Booth Multiplier
This paper proposes the design and implementation of Booth multiplier using VHDL. This compares the power consumption and delay of radix 2 and modified radix 4 Booth multipliers. Experimental results… - Airborne mapping using LIDAR
Mapping is a central and common task in robotics research. Building an accurate map without human assistance provides several applications such as space missions, search and rescue, surveillance and… - Yaw Rate and Lateral Acceleration Sensor Plausibilisation in an Active Front Steering Vehicle
Accurate measurements from sensors measuring the vehicle’s lateral behavior are vital in today’s vehicle dynamic control systems such as the Electronic Stability Program (ESP). This thesis concerns… - A Sub 1V 96 µW Fully Operational Digital Hearing Aid Chip With Internal Status Controller
A Low power fully operational digital hearing aid chip is proposed and implemented. The Σ-∆ ADC adopts the status controller to realize adaptive SNR technique without any external control. To achieve both low power… - Evaluation of GPS Velocity and Altitude Data used for Road Grade Estimation
This master’s thesis examines whether it is possible to improve an existing road grade estimator by measuring an additional signal from a GPS receiver. The existing estimator uses the differentiated… - Step-wise Smoothing of ZUPT-aided INS
Due to the recursive nature of most foot-mounted zero-velocityupdate-aided (ZUPT-aided) inertial navigation systems (INSs), the error covariance increases throughout each step and “collapses” at the… - Speech Enhancement using an Adaptive Wiener Filtering Approach
This paper proposes the application of the Wiener filter in an adaptive manner in speech enhancement. The proposed adaptive Wiener filter depends on the adaptation of the filter transfer function… - Implementation of a Program Address Generator in a DSP Processor
The purpose of this study is to construct a “Program Address Generator”(PAG) to a 24-bit Harvard type, RISC DSP processor using the VHDL language. The PAG is a part of the program control unit, and… - The Survey of Detection Methods and Test beds For Cognitive Radio Application
The need for RF spectrum for the rapidly growing broadband access services is evident. Cognitive radio is an emerging technology that aims to introduce secondary usage of the spectrum… - Modular General-Purpose Data Filtering for Tracking
The need for RF spectrum for the rapidly growing broadband access services is evident. Cognitive radio is an emerging technology that aims to introduce secondary usage of the spectrum… - UAV Tracking Device using 2.4 GHz Video Transmitter
The purpose of this study was to automatically track an Unmanned Aerial Vehicle (UAV), with an electronically steered antenna. To make it possible to track the UAV during flights, a 2.4 GHz transmitter… - Simultaneous Localization And Mapping in a Marine Environment using Radar Images
Simultaneous Localization And Mapping (SLAM) is a process of mapping an unknown environment and at the same time keeping track of the position within this map. In this theses, SLAM is performed… - Signal processing using the wavelet transform and the Karhunen-Loeve transform
This degree project deals with Wavelet transform and Karhunen-Loeve transform. Through the mathematic description to understand and simulation to investigate the denoise ability of WT and the… - Low Power and Low Complexity Shift-and-Add Based Computations
The main issue in this project is to minimize the energy consumption per operation for the arithmetic parts of DSP circuits, such as digital filters. More specific, the focus is on single… - Design and Development of a Heart Rate Measuring Device using Fingertip
In this paper, we presented the design and development of a new integrated device for measuring heart rate using fingertip to improve estimating the heart rate. As heart related diseases are…
>> More Final Year Electronics Project Titles on DSP for Students
>> Digital Signal Processing based Engineering Project Ideas with Free Downloads